Thursday, July 7, 2011

How many holes?

Bob over on Boat Bits has posted a sobering rant that every boat owner should read.  Here is a tease - a short test from the end of the post:
So here is a quick and handy test to see if you have a too complicated (spelled unsafe) boat...
  1. How many seacocks and thruhulls do you have?
  2. Do you know where they all are and how to get to them in a hurry?
If the answers to #1 and #2 require ponderation of any sort exceeding ten seconds you have too many holes in your boat.
But I'd like to amplify that a little.

It isn't just that you have to know where all the seacocks are and be able to reach them..  You must be able to reach and operate them when the boat is sinking:
  • It is pitch black inside the cabin because the batteries are shorted out.
  • You are at sea, in a storm (of course...); the boat is rolling.
  • The floorboards are floating.  This means that the bilge is under water - water that is now probably mixed with battery acid, diesel, and oil.
And under these conditions, you must be able to hold your breath, squeeze your eyes shut and submerge yourself into the water.  You must know where the valves are... by feel, and be able to operate them holding your breath, submerged in foul water.

Think you can?

Tuesday, July 5, 2011

Bug Screen for Companion Way Hatch

It seems that this is the time of year when folks are thinking about straining the bugs from the air they direct below for ventilation. Here's a solution that Paul on s/v Solace came up with:
In addition to our new bug screens placed on the hatches inside the boat, we came up with an idea for the companionway hatch that is easy, cheap and functionally easy to apply and use.

My wife sourced curtain mesh from a haberdashery (that is a curtain/fabric store) along with weighted line used to weight the bottom of curtains. She sewed a bungy into the mesh which sits along the top of the companionway slide and we had convenient power out sockets on which to locate the bungy hooks.



From the bungy, all around the edge, was sewn the weighted line/rope that we also bought; to give the mesh the ability to form to the companion way entrance.

Egress is now easy to just brush aside the mesh and then throw the weighted edge back over the companion way once you have made your way through.

From inside 

Wednesday, June 29, 2011

Moving water

Our friends on s/v Letitgo show us an easy way to move water from where it shouldn't be to somewhere else...
Our dock neighbour and friend, also a veteran catamaran sailor who sailed from the West coast to New Zealand and back, parted with us a very wise advice few weeks ago.  While filling his water tank he discovered that a fitting had broken during the winter and the entire content went into the front cabin.  Not the most pleasant of Spring surprise though a hard reality.  This is when he showed us his creative portable bilge setup.  Luckily on multi hulls we have separated “water tight”compartments but not all are linked to the bilge pump, hence the need for this clever device!  You can plug it as you need it, vacuum whatever needs to be done and then store it for the next event.  As you can see on the picture below,  yesterday while purchasing the replacement strainer screen for the water system, I acquired the entire elements to have my own portable pump.

Here are the ingredients you will need:
  • 15ft of bilge tubing,
  • 30 ft of 16 gauge electric cable,
  • one male 12 volt plug, one clamp
  • and one rule 500 GPH bilge pump.
I don’t have to teach you how to put it together, but for $30 it is a nice little system to have on board even just to empty the dinghy when you leave it out and it rain really hard.  Not that we will ever do that around here, no.
We have a similar system on Eolian, and it has served us well.

Monday, June 27, 2011

5200: Sailmaker's tool

3M 5200 sticks to everything, and is for all intents and purposes a tough, permanent adhesive - right?   Can you think of a better sailmaker's adhesive?  Livia on s/v Estrellita 5.10b shows us how in another in her continuing Haul Out series:


P1010725 (1280x960)One of the things I wanted to do while the mast was off (and the sails were off as a result) was to examine all of sails.

I made it through the main, the jib and the genoa which, considering the path of the haulout, I’ll take as a success.  Other than one known issue (below), the sail slides that I changed out, and some sunbrella stitching that needed touching up, everything looked great.  All of the between panel stitching was intact, the head, tack and clew of the sails were in good shape and the “edges” (luff, foot and leech) were solid. In essence, what I did was to look at the general state of the Dacron (good) and then walk through every line of stitching looking for broken stitches (from chafe, UV or both).  Our sails are double and triple stitched everywhere so a single broken stitch or a small patch in one line of stitching isn’t a big problem – although you have to ask yourself why it was failing in one area and see if there is chafe that should be attended to.

Speaking of chafe (*snort*), the leather chafe gear that I added to the jib 10 months ago looks good with only minor signs of wear – the wear meaning that it is doing its job.

P1010722 (1280x960)P1010723 (1280x960)

We had two fairleads on the mainsail for our Dutchman system that had popped off.  There are two halves, one on each side of the sail that snap onto each other through the sail, but ours are old and apparently too warped to stay snapped on.  One departed when the monofilament line broke and one just popped off and sat flapping on the filament.  We’ve had a number of people try to scare us about our Dutchman system – saying that if a fairlead failed the monofilament would saw a hole through our sail.  I can see how that could happen but because we loosen our Dutchman when the main is up, it seems like that wouldn’t happen for quite a while and one would have a chance to notice it and fix it.  We have no idea.  However, our old main still has a lot of life in it.  The Dutchman system is already cut into the sail and makes dropping and reefing the sail a cinch…so we’re keeping it.  Someday, when we get a new main, we’ll have a decision to make.

P1010717 (1280x960)P1010719 (1280x960)

The fairleads are ridiculously expensive and thankfully our cool local sail shop (Leitch & McBride in Sidney, BC – they’ve done several jobs for us including installing a third reef) had some used ones.  Because the Dutchman system will be on our main until we replace it, I used some flexible, fast drying white 5200 and glued those puppies back together making sure that there was 5200 between the little snaps that connect the two pieces.  With a little weight to make sure everything stayed aligned, it dried as designed.

P1010718 (1280x960)P1010720 (1280x960)   

5200 is a dangerous toy because it should only be used on something that will “never” need to come apart…for that reason this seemed like the perfect use.  We want the fairleads to *never* come apart again.

Friday, June 24, 2011

No more Mr. Clean

Please welcome new contributors  Christie and Matt aboard s/v Kaleo. As their first contribution, they offer us tips on cleaning supplies made from commonly available ingredients:
Who doesn’t like a clean house? Whether it be out to sea or ashore, we’ve found a few simple recipes that help us keep Kaleo shining inside from stem to stern.

Yet you won’t find Mr. Clean or Windex lurking under our galley sink.

With just a few basic items that you most likely have on hand (water, vinegar, baking soda, tea tree oil), you can do almost all of your household cleaning, save money, and keep your home free of the toxins found in many store-bought cleaning products.
Here are a few recipes that will help you do most of your everyday cleaning:

General Surface Cleaner
  • 1 cup water
  • 1 teaspoon tea tree oil
Combine in a spray bottle, shake to blend, and use to clean general surfaces such as counter tops, sinks and the stove. Do not rinse.

Tea tree oil is antiseptic, germicidal, antifungal, and antibacterial agent making it a very effective surface cleaner.


Mold and Mildew Eliminator
Using the same recipe as above, wipe down surfaces in high-mold or high-humidity areas. Tea tree oil is a natural fungus fighter but if you encounter large amounts of mold, or black mold, however, call a mold-removal specialist.

Head (Toilet) Cleaner
  • 50% water
  • 50% white vinegar
Mix in a small spray bottle and use for head surfaces, the toilet bowl and wiping down the gel coat shower pan. If you’re concerned about the smell of vinegar, you can add a few drops of essential oil to your mix, but know that the odor of vinegar disappears as it evaporates.
In addition, about once per month we run a pint of undiluted white vinegar into the toilet, flush once and let it sit overnight to fight the salt water deposits that build up.

Glass Cleaner
  • 1 cup rubbing (isopropyl) alcohol
  • 1 cup water
  • 1 tablespoon white vinegar
Mix the ingredients into a spray bottle for an effective glass cleaner. It also works well on the chrome faucets in the galley and head and even on the stainless steel dorades and rails on deck.

Trash Can Deodorizer
Mix the two ingredients thoroughly, ensuring all lumps are removed. Place a (fresh) piece of absorbent cloth on the bottom of the trash can and sprinkle this mixture over it. Change the pad and deodorizer every other week or so.


A few other natural deodorizers

  • Boil 1 tablespoon of vinegar in 1 cup of water to eliminate unpleasant cooking odors
  • Baking soda is excellent for absorbing odors in the fridge or icebox

Laundry Detergent
  • 4 cups of water
  • ⅓ bar of natural soap, grated
 (this is where the scent will come from in the detergent, so go with something you like)
  • ½ cup washing soda (not baking soda)
  • ½ cup of Borax (20 Mule Team)
  • 5-gallon bucket for mixing
  • 3 gallons of water
  • (optional) A few drops of scented oil such as tea tree or lavender which will overpower the soap (especially if you choose unscented)
First, mix the grated soap in a saucepan with 4 cups of water, and heat on low until the soap is completely dissolved. Add hot water/soap mixture to 3 gallons of water in the 5-gallon bucket, stir in the washing soda and Borax, and continue stirring until thickened. Let the mix sit for 24 hours and it’s ready to go. Use 3/4 cup per full load. You can store this in gallon jugs aboard and fill a water bottle to take to the laundromat.

Bug Trap – Not really a cleaning product but one we use when those nasty fruit flies visit.
  • 1/4 cup apple cider vinegar
  • 2-3 drops of dish soap
Cut the top off a small plastic cup. Add apple cider vinegar and drops of dish soap. Place on your kitchen counter and within minutes the little buggers will be swimming. Apple cider vinegar attracts the bugs and the dish soap traps them on entry.
Happy (and healthy) cleaning!
Editor's note: Please don't confuse washing soda (sodium carbonate, NA2CO3) with baking soda (sodium bicarbonate, NAHCO3). Tho the names and formulae are similar, they are very different chemicals.  One is suitable for use as an eyewash (the bicarbonate) and the other could cause blindness if you get it in your eyes (the carbonate).

Wednesday, June 22, 2011

Man made breeze

Mike of s/v Chalice puts his considerable woodworking skills to the task of adding ventilation using muffin fans:
I needed a bunch of fans for the boat. If you have priced these recently you will see they are not cheap, price wise anyway. So I said " I think I'll make my own". Here is how I did it.
Find the fan you would like to use. I had 2 on hand, and found some more on Ebay.
From Update 6-8-2011


Measure it then figure how to mount it. I wanted a nice teak mounting to match the rest of the boat. I also built one with mahogany and sapele wraps. These I used a spray urethane on them. The teak ones I oiled.

So make the wood bits first. I used some scrap to test.

From Update 6-8-2011


The holes are for the swivel bolts and nuts. I used nylon bolts and wing nuts from Lowes and Home Depot. Add the rubber washer to hold it from turning. You do not need to tighten them tight as they hold real well.

From Update 6-8-2011


Glue them in with some epoxy (J-B Weld). Then run thru the router to clean them up.
From Update 6-8-2011

From Update 6-8-2011


Wire in the switch then glue them up. Give them a final sand then oil or add desired finish.
Also make Aluminum brackets.
Clamp available here.

From Update 6-8-2011


From Update 6-8-2011


Finished fan.

From Update 6-8-2011


You could make all the cuts for the wood on a table saw, but I used a router for the channel. Also the switch came from Radio Shack. I put it in one of the screw holes for the grill. Drill a half inch hole opposite to insert the switch. This hole is where the wires will come back out.

Related Posts Plugin for WordPress, Blogger...