Monday, June 20, 2011

One stone, two birds

Please welcome new contributor s/v Peregrina! In one of those great but seemingly rare instances, we learn how a tool that you may (should?) have on board can serve an entirely different purpose.

I had one last cable to make up, but after three boats the tool had finally given up.  I had just got done with a job on relatively mall gauge battery cables on the venerable GAUCHO, and one of the threads on the tool had completely stripped out.  I was able to use my broken tool in the vise in my onboard workshop to make up one end of the 8 foot long 1/0 gauge cable that would run to the starter on PEREGRINA.  It was easier to run the cable without the other end made up, and I  was not sure of the actual cable length needed.

The old and new --  
I had one last end to make, and I wanted this tool that I have used for so long in the tool chest.  $30 later I have the new, replacement #2 size of the "swage-it tool" - but I have never used it as Nicropress intended - for swaging.  The catalog says - For nicropress copper oval sleeves only.  Do it yourself swaging! With just a wrench...  


This is a rigging tool to swage wire around thimbles, but it is perfect for attaching tinned copper lugs to battery and other large gauge cables - and yes, with just a wrench.




I had tried using Ancor's Heavy Duty Lug Crimper with a hammer and it never worked for me, but maybe I just needed a much heavier  hammer.  I sold this expensive tool I thought the Nicropress tool might just might work.  It did, and we have had a long relationship working on progressively bigger cables as the size of my boats increased - so much so that the internal threads on the tool gave out.


What is unique about this tool is you don't need a hammer, or a vise - you just need a wrench.   Turn the two bolts to evenly bring pressure on the lug - I keep going until It is very hard to turn - and you have a very strong crimp.  This means you can lead the cable as needed, cut to length, and without pulling the whole thing out - crimp on the lug.  


For this job I put in two crimps but one would have been enough.  The tool makes a nice job of it.  Add some heat shrink tubing to keep moisture out, and you have a professional cabling job - using a wrench!


The finished cable end

Wednesday, June 15, 2011

Vinegar is your friend

On a boat that lowly cooking ingredient, white vinegar, can really turn out to be useful.

White vinegar is nothing more than a 5% solution of acetic acid (a weak organic* acid) in water.

As a general cleaner, you will find straight vinegar to be superior -  it kills bacteria and other microbial life forms, and the organic nature of the acetic acid helps to solubilize dirt and grease.  And it is completely natural.  No rinsing is necessary.

Vinegar kills mildew and algae growing in or on surfaces by subjecting them to a low pH which they cannot tolerate.  On Eolian, our worst examples are to be found on the underside of the bimini and dodger canvas in the cockpit.  After a winter of being closed up, the colonies are especially numerous and colorful just over the vent in the galley ceiling.  Sponge it on, and brush the cloth surface gently but thoroughly to break up the colonies.  The vinegar itself calls for no need to rinse - unlike bleach, vinegar evaporates completely, leaving no residue whatsoever.  However, the corpses of the dead algae and mildew left behind from the treatment will still be present; hosing down the surface will help to flush them away.  We recently used straight vinegar to clean the sunshield on our foresail.

Most boat owners know that flushing a little vinegar from time to time will help to keep the head internals and the head lines free of carbonate deposits.  Because it is acid, the vinegar dissolves them.  But it is not a strong enough acid to damage the head internals, the plumbing, or your holding tank (unless perhaps it is an aluminum tank - but that would be a terrible materials choice for a holding tank).  It works slowly tho, so it is best if you think about it as a slow-acting cleaner...  Don't just pour it into the bowl and flush it away - it won't have had time to work on the carbonate deposits.  Pour a pint or so in the bowl and let it stand for an hour or two to soften or remove lime deposits there.  Then pump out the bowl (but don't rinse), moving the vinegar thru the head internals and into the joker valve and the first part of the plumbing.  Let it stand for a few more hours.  Then rinse the bowl with 4-5 pumps, which will move the vinegar further downstream in the plumbing. 
The chances are excellent that the ID of your head pump is about the same as the ID of your head plumbing.  So one stroke of the pump will move things thru the plumbing about the same distance as the length of that stroke, perhaps 6".
  I know this sounds tedious, but if you time things right in your daily living, it can work out pretty well.  It is especially advantageous if you can get some vinegar into the head internals and the plumbing if you are going to leave the boat for a few days, thereby giving it lots of time to act.

And it is incredibly cheap - cheaper than bottled water**!  We always keep a gallon or two on board.


*Not "organic" as in some vague politically correct term for food items produced without chemicals, whatever that means, but rather meaning composed solely of carbon, hydrogen and oxygen.

**Do not get me started on bottled water.

Monday, June 13, 2011

Upgrade to less power

Paul on s/v Solace instructs us on replacing fluorescents with LEDs.
Original non working light

We have had a fluorescent light inverter/ballast fail on us and had a number of options to choose from. My first thought was to change the whole light structure to a more modern fitting, but was eventually convinced by my wife that to do so, was taking from the character of the boat. A new light could have been procured from the USA, but I was still looking for a better light that uses less power. Here's what I did to keep both the original light fixture, but upgrade the light that consumes less power.





I removed the light fixture and purchased a LED strip light that would fit the light fitting. 
New LED lights ready to be fitted.

I removed the the two ends for the florescent tube to make way for the new LED strip. I applied double sided tape used to attach mirrors to walls etc, to secure the LED strip and the switch, to the old light fitting. It was important to keep the original switch as it contained the electronics which helps with the LED strip to function efficiently.







Removal of the florescent ends needed


New LED light fitted.

The refitted unit was wired so that the original switch on the side was the main means of turning the unit on . The inline switch supplied with the LED strip was left on and fitted inside the light fixture. My wife has  declared the light very good, and now wants me to convert another light so she can do fine needle work.
Finished light.
Time to complete was about 40 minutes and the LED strip procured locally in New Zealand for about $37USD
Nicely done! And it does retain the original character - an important consideration for boats.

Wednesday, June 8, 2011

Cargo

Steve and Lulu on s/v Siempre Sabado use their macramé skills to control deck cargo:
I don't really like carrying stuff on deck. It cuts into the walking around room and is one more thing to fret about when things get rough. But, if you're going to cruise on a 28' boat, chances are some stuff will end up topsides. Things like extra diesel jerry jugs, extra anchors and associated rodes, the dingy, etc. Are big and can be lashed down pretty effectively. But what about the smaller stuff? The little one-gallon gas cans for the generator and dinghy, extra lines, extra fenders, kickboards, life jackets for the dinghy, etc, etc? On the trip down the coast all this stuff was lashed to the top of the sea hood (turtle) and alongside it as well, basically the area between the mast and the dodger. It was all lashed down with a spider's web of knots and actually made the trip quite nicely. But getting things in and out was always a puzzle. As soon as the load changed a bit, the knots had to be re-done in some new and creative way. There had to be a better solution.

One day while sitting outside trying to get my lily-white thighs closer to the color of the rest of my legs, it came to me: a cargo net! We used cargo nets made of nylon webbing a lot in the Navy for just this purpose. Well, we also used them as big bags to transfer loads from one ship to another but we probably won't be rigging any highlines for something like that. What I needed was a cargo net that I could drape over the deck cargo and then just have to lash one end down.

I had some nylon line I'd bought a few years ago for new halyards, sheets, etc. It's called Sta-Set X or something like that and is godawful strong. However, it's also godawful stiff and I hate it. But I'm not about to throw usable line away so I needed to find other uses for it. So far it had mostly just been taking up space in the lazarette. Oh, I did make two boarding ladders out of the stuff but I still had a lot of it, mostly in relatively short pieces. I figured that I could knot these together in such a way as to make a large-weave net about 3' wide by 6' long. This would be just right for covering the deck cargo.

I tied a cross piece to the boom gallows supports and tied a bunch of 21' long pieces, doubled, over this cross piece. Then, in good old macrame-er fashion, I started tying square knots. It was an unholy mess while I was doing it but, in the end it seemed to come out all right.


The port side is lashed to the handrail and the starboard side is held down by a trucker-style bungee cord. Most access is done via the starboard side although I can squeeze the lifejackets and kickboards in under the forward opening. The Sta-Set X doesn't hold knots very well which is why some of the square knots are somewhat misshapen. But, I'm going to shape them right and then lash them with some tarred marline so they behave. I also still have some whipping to do to the ends on the port side. I was going to do this before I put the net to use but, while trying it on for size, it worked so well that it's just been sitting there since. I'll get to these finishing touches but, like so many things, that's not likely to happen until mañana.

BTW: that white line at the top righthand side of the photo that looks like it's just standing straight out on its own? It's the bitter end of a piece of 3/16" cord that is holding the front corner of the cockpit shade to the shroud. The breeze is keeping it aloft like that.

Monday, June 6, 2011

Pledge Drive

I hope you have been enjoying the ongoing series of projects posted here.

This is your site.    For this to work out for all of us, everybody needs to contribute - think of this as a pot luck dock party.

Come on now.  All of you have a small project of one kind or another that others would be interested in seeing. Contribute to the feast:
  • Write it up and send it to SmallBoatProjects at gmail dot com
- or -
  • If you have already written it up on a blog somewhere and are willing to share, tell me where in the wide world of the Internet to find it , and I'll come and get it.
- or -
  • Give me permission to "mine" your blog for projects. Anybody who is writing a blog about boating has numerous small projects buried in there. I'll ferret them out, if you let me. No, I won't put your content on here without your permission.
- or -
  • Send me what you have, and I'll do the write-up, with full credit going to you as your project, of course.

Every posting will feature a link to your article (if there is one) and a link to your blog (if you have one).  In addition, all contributors will permanently have a link in the "Contributors" box on the right side of the blog. This ought to drive some of the traffic that this site is seeing back to your site.  I will not take any recent posts (unless you tell me otherwise) - that way this site will not be in competition with yours. Instead, it will hopefully serve to "reactivate" some of your older posts.

But the most important benefit you'll get is the warm feeling of having helped someone thru a problem - one that you have solved. And we will all be the richer for it.

Pitch in!

Friday, June 3, 2011

Kool Aid to the rescue... again!

Kool Aid as a tool?  Livia and Carol on s/v Estrellita 5.10b show us once again why they are the Kool Aid boat on the dock!
In addition to “what is that smell? where is that smell?” sometimes boaters get to play “what kind of water is that (salt or fresh)? where is the water coming from?”.  We played that game in the Copeland Islands swinging at anchor.

The game is complicated when it is raining, the boat is humid and cold and thus condensation is running rampant and the water is pooling near a thru hull (one of the big holes in the hull of the boat). After the initial panic where you establish that the water is fresh (not saltwater) and coming from somewhere above the thru hull, you get to play “where is the water coming from?”.

P1010842 (1280x960)After ripping apart the port bench and all of the goodies stored on and around it, we established that the water was coming from somewhere behind our water tank and didn’t appear to be coming from the condensation on the hull. Bummer – all signs pointed toward a leak in the port freshwater tank.

P1010844 (1280x960)For the second time on our boat, Kool-Aid to the rescue! We put Kool-Aid (without sugar) into the port tank to verify the tank was leaking before we tried to remove it and fix the leak.

A few moments later as we watched the drip on a clean paper towel, we had confirmation.  The drip on the right is a test drip and the drip on the left was from the tank.

After some wrestling, we removed the tank.  Thankfully this is a fairly easy job on a Pretorien.  Pretorien owners – if you remove a small piece of wood in the port locker at foot level just forward of the tank, you can undo the two forward bolts.  With those removed, you can jiggle the tank off the aft bolts (to which we couldn’t find access to the heads, only the nuts) and pull the tank into the salon.

I (Livia) put my head on the floor and Carol lowered the tank over me until it dripped.  After a few tries I was able to make smaller and smaller circles until we found a pinhole.  Strangely to me, a pinhole leak looks exactly like someone jammed a pin through the tank. Weird, huh?  We repaired it with some MarineTex we had aboard (thank you PO!).

P1010845 (1280x960)   P1010848 (1280x960)
The leak occurred where the steel touched the wooden ribs underneath it. An ideal installation would have the tank suspended so no water could pool.  In one of his books, Nigel Calder recommended putting something nonabsorbent at that location if the installation had surface contact.  We cut some ready-for-the-bin neoprene gloves and glued them to the ribs.
P1010847 (1280x960)P1010851 (1280x960)
This will hopefully prevent future pinhole leaks…at least in the port tank.  Thankfully it was sunny that afternoon because we had to wait hours for the MarineTex to cure with the entire boat piled with stuff including a 33 gallon water tank.  Picnic on the deck anyone?
Related Posts Plugin for WordPress, Blogger...